Home > Rubber Oil Seal >

Heavy Truck Valve Stem Oil Seal ，Valve Oil Seal Material: NBR, Rubber

Product Categories

Hebei Te Bie Te Rubber Product Co., Ltd.

Contact Now

Heavy Truck Valve Stem Oil Seal ，Valve Oil Seal Material: NBR, Rubber

Name: Heavy Truck Valve Stem Oil Seal Valve Oil Seal Material NBR Rubber
Brand: Tebiete
Price: 1 USD

Cheap Heavy Truck Valve Stem Oil Seal ，Valve Oil Seal Material: NBR, Rubber wholesale

Brand Name : Tebiete

Model Number : Heavy Truck Valve Oil Seal

Certification : IATF 16949: 2016 , ISO 9001:2008

Place of Origin : China

MOQ : 200 sets

Price : US Dollars $0.15-$4.02

Payment Terms : T/T

Supply Ability : 100000 pcs / day

Delivery Time : 10-30 days

Packaging Details : Plastic Bag+ Box+ Carton Box; 40-200pcs/ Outer Carton 12pcs/ carton box

Material : Rubber, NBR, PTFE, PU,

Feature : Oil Resistance, Corrosion Proof, Sealing Performance, Factory And Home, Heat-Resisitant

Oem : Aviable, OEM is welcomed, Acceptable, Highly Welcomed

Sample : Available, Freight Collect, Provide free samples,

Package : Inner pack is PE bag and out packaging is carton box,12pcs/ carton box

Product name : oil seal, V shape rubber oil seal good price, China Supplier FKM Rubber Oil Seal for Gearbox, silicone o ring, Silicone Rubber Lip Seal

Contact Now

Product Name:Heavy Truck Valve stem oil seal ,Valve oil seal Material: NBR, Rubber

Install and replace valve oil seal:

1. Disassembly steps of valve rod oil seal:
(1)Remove the camshaft and hydraulic tappet, and its face down storage, operation must pay attention to the tappet is not interchangeable. Remove the spark plug using the spark plug wrench 3122B, adjust the piston of the corresponding cylinder to the top dead center, and screw the pressure hose vw653/3 into the threaded hole of the spark plug.
(2) bolt the spring compression tool 3362 onto the cylinder head, as shown in figure (1).

Heavy Truck Valve Stem Oil Seal ，Valve Oil Seal Material: NBR, Rubber

Adjust the relevant valves to the correct position and connect the pressure hose to the air compressor (air pressure at least 600kPa). Press down the valve spring with the threaded mandrel and thrust piece and remove the spring.
(3) can tap valve spring seat remove air lock block. Pull the valve rod oil seal with tool 3364, as shown in figure (2).

Heavy Truck Valve Stem Oil Seal ，Valve Oil Seal Material: NBR, Rubber

2. Installation of valve rod oil seal.
Attach the plastic sleeve (FIG. (3) A) to the valve stem to prevent damage to the new valve stem oil seal. Apply a light coat of oil to the oil lip. Attach the oil seal (figure (3) B) to tool 3365 and slowly push it onto the valve guide. Special note: apply a layer of oil on the valve rod before installing inlet and exhaust.

Heavy Truck Valve Stem Oil Seal ，Valve Oil Seal Material: NBR, Rubber

Key Benefits:

A. Easy to Fit - Any tool will work, even your hands.

B.Impossible to Damage during Installation.

C.Standard & Premium Versions available.

D.Unrivalled protection against contaminants.

E.Eco-friendly - low friction from the outset.

Product Tags:

high temperature oil seals

rear wheel oil seal

Heavy Truck Valve Stem Oil Seal ，Valve Oil Seal Material: NBR, Rubber Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Hebei Te Bie Te Rubber Product Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!